aruba_335_chauapc
HPE Aruba IAP 335 chauapc.com.vnBộ phát WiFi Aruba IAP 335 chauapc.com.vnBộ phát WiFi Aruba 335 chauapc.com.vn

9,900,000  [Giá đã bao gồm VAT]

WiFi băng tần kép Chuẩn AC – Tốc độ: 2333Mbps
Băng tần 2.4Ghz: 600Mbps – MIMO 4×4
Băng tần 5Ghz: 1733Mbps – MIMO 4×4
Kết nối tối đa 256 User trên mỗi băng tần
Cấp nguồn bằng: PoE 802.3at hoặc DC 48V-0.75A
Hàng Mới 100%. Miễn phí giao hàng trong nội thành Hà Nội.

Bảo hành:

12 tháng

SKU: iap 335

Danh mục:

Thẻ: ,

Thông số kỹ thuật Bộ phát WiFi Aruba Instant IAP-335

TECHNICAL SPECIFICATIONS
AP type Indoor, dual radio, 5 GHz 802.11ac 4×4 MIMO and 2.4 GHz 802.11n 4×4 MIMO
Radio 5Ghz– Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4×4 VHT80 or 2×2 VHT160 client devices

– Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously

Radio 2.4Ghz Four spatial stream Single User (SU) MIMO for up to 600 Mbps wireless data rate to individual 4×4 HT40 client devices
Maximum number of associated client devicesUp to 256 associated client devices per radio 
Maximum number of BSSIDs16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply)– 2.400 to 2.4835 GHz

– 5.150 to 5.250 GHz

– 5.250 to 5.350 GHz

– 5.470 to 5.725 GHz

– 5.725 to 5.850 GHz

Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies– 802.11b: Direct-sequence spread-spectrum (DSSS)

– 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types– 802.11b: BPSK, QPSK, CCK

– 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 

802.11n high-throughput (HT) supportHT20/40
802.11ac very high throughput (VHT) support:VHT20/40/80/160
Supported data rates (Mbps):– 802.11b: 1, 2, 5.5, 11

– 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

– 802.11n: 6.5 to 600 (MCS0 to MCS31)

– 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)

802.11n/ac packet aggregation:A-MPDU, A-MSDU
Transmit powerConfigurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):– 2.4 GHz band: +24 dBm, 18 dBm per chain

– 5 GHz band: +24 dBm, 18 dBm per chain

WI-FI ANTENNAS
Antenna– Four (vertically polarized) integrated 2.4 GHz downtilt omni-directional antennas for 4×4 MIMO with peak antenna gain of 3.8dBi per antenna.

– Each 5 GHz radio chain has both a vertically and a horizontally polarized antenna element; AP software automatically and dynamically selects the best set of elements for each data packet transmitted or received.

– Four integrated vertically polarized 5 GHz downtilt omnidirectional antennas for 4×4 MIMO with peak antenna gain of 4.9dBi per antenna

– Four integrated horizontally polarized 5 GHz downtilt omni-directional antennas for 4×4 MIMO with peak antenna gain of 5.7dBi per antenna

– Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.

– Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 1.6dBi in 2.4 GHz and 2.5dBi in 5 GHz.

OTHER INTERFACES
Interfaces• One HPE Smart Rate port (RJ-45, maximum negotiated speed 5Gbps)

– Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX

– 2.5Gbps and 5Gbps speeds comply with NBase-T and 802.3bz specifications

– PoE-PD: 48 Vdc (nominal) 802.3at PoE

• One 10/100/1000BASE-T Ethernet network interface (RJ-45)

– Auto-sensing link speed and MDI/MDX

– PoE-PD: 48 Vdc (nominal) 802.3at PoE

• Link aggregation (LACP) support between both network ports for redundancy and increased capacity

• DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length

• USB 2.0 host interface (Type A connector)

• Bluetooth Low Energy (BLE) radio

– Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity

– Integrated antenna with roughly 30 degrees downtilt and peak gain of 5.1 dBi

• Visual indicators (tri-color LEDs): for System and Radio status

• Reset button: factory reset (during device power up)

• Serial console interface (RJ-45, RS232)

• Kensington security slot

FLEXIBLE OPERATION AND MANAGEMENT
Controller-managed modeWhen managed by Aruba Mobility Controllers, Aruba 330 Series Access Points offer centralized configuration, data encryption, policy enforcement, and network services, as well as distributed and centralized traffic forwarding.
Aruba Instant modeIn Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows 330 series Instant APs to become part of a WLAN that is managed by a Mobility Controller
Remote AP (RAP)for branch deployments
Air monitor (AM) for wireless IDS, rogue detection, and containment.
POWER SOURCES AND POWER CONSUMPTION
Power Sources• The AP supports direct DC power and Power over Ethernet (PoE)
• When both power sources are available, DC power takes priority over PoE
• Power sources are sold separately
• Direct DC source: 48Vdc nominal, +/- 5%
– Interface accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
– When using IPM, the AP may enter power-save mode with reduced functionality when powered by a PoE source (see details on Intelligent Power Monitoring in this datasheet)
– Without IPM the AP will apply some fixed restrictions when using PoE:
> The USB interface is disabled when using an 802.3at PoE power source
> The USB interface and second Ethernet port are disabled, and both radios operate in 1×1 mode when using an 802.3af POE power source
• Maximum (worst-case) power consumption: 25.3W (802.3at PoE), 13.2W (802.3af PoE) or 25W (DC)
– Excludes power consumed by external USB device (and internal overhead); this could add up to 5.9W (PoE or DC) for a 5W/1A USB device
• Maximum (worst-case) power consumption in idle mode: 10.9W (PoE or DC)
MECHANICAL SPECIFICATIONS
Dimensions/weight (unit, excluding mount accessories):• Dimensions/weight (unit, excluding mount accessories):

– 225mm (W) x 224mm (D) x 52mm (H) 8.9” (W) x 8.9” (D) x 2.0” (H)

– 1150g/41oz

• Dimensions/weight (shipping):

– 335mm (W) x 290mm (D) x 85mm (H) 13.2” (W) x 11.4” (D) x 3.35” (H)

– 1750g/62oz

Dimensions/weight (shipping):– 315mm(W) x 265mm(D) x 100mm (H) 12.4” (W) x 10.4” (D) x 3.9” (H)

– 1,350g/48 oz

ENVIRONMENTAL SPECIFICATIONS
Operating conditions• Operating:

– Temperature: 0° C to +50° C (+32° F to +122° F)

– Humidity: 5% to 93% non-condensing

Storage and transportation conditions– Temperature: -40° C to +70° C (-40° F to +158° F)
RELIABILITY
Mean Time Between Failure (MTBF):MTBF: 531,662hrs (61yrs) at +25C operating temperature
MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS​
ArubaOS6.5.0.0, 8.0.1.0
Minimum Software Release4.3.0.0

 

Đặt mua hàng Online Shopee: https://shopee.vn/mucinchaua

Sản phẩm liên quan

Hỗ trợ khách hàng

Kinh doanh 01

   Zalo: 09474 01234


Kinh doanh 02

Zalo: 0981 628 204


Kinh doanh 03

Zalo: 05 6666 9958

Sản phẩm mới